Parts and upgrades for the Yozma IN 11, the 4800W bike Yozma launched in October 2026, written IN11 or In-11 by most riders. Eight parts fit it: the Ultra Bee rear brake kit on a mount cut for the IN11 frame, the shift lock, 28.6mm handlebars, wide footpegs, ODI Ruffian grips, a titanium vented number plate, a battery powered Baja light kit and a shock cover. The IN 11 keeps the IN10's 14in front and 12in rear wheels, and the bars, pegs and shift lock made for the IN10 fit the IN11 as well. The brake kit does not cross over; the IN11 kit is its own part. Parts for the IN10 and IN10 Pro are on the Yozma IN10 and IN10 Pro page.
Yozma IN11 brake upgrade
The Yozma IN11 Ultra Bee brake kit replaces the stock rear brake with a genuine Surron Ultra Bee brake assembly on a 6061 EXC mount cut for the IN11 frame. It runs on the factory rotor, mounts with the included bracket and pin, and comes as a complete kit: brake assembly, mount, pin and dust cover. More bite and a firmer lever than the stock hydraulic rear brake, on a bike with 4800W and auto wheelie assist where the rear brake is what brings the front wheel back down. Pads, hardware and reservoir caps for it are under Yozma brake upgrades.
IN11 shift lock, footpegs, handlebars and grips
The wheelie setup. The Yozma shift lock, also called a foot lock, bolts to the left side and gives the boot a hook point on wheelies and balance point work, with titanium bolts, grip donuts and a socket spinner in the box. Wide footpegs replace the narrow stock platforms with a wide peg on titanium pins, springs and hardware included, in chrome or black. The 28.6mm V2 handlebars are 803mm wide with a 90mm rise and drop into the stock IN11 clamp, gloss black or chrome. ODI Ruffian half waffle grips are the slip-on grips for the IN11's twist throttle, 120mm long in a medium compound.
IN11 number plate, Baja light and shock cover
The titanium vented plate is a front number plate with mesh vents, titanium bolts and the EXC number one graphic, chrome or black. The battery powered Baja light kit is a Baja style light on its own battery with an on/off switch, so nothing wires into the IN11 harness. The shock absorber cover slips over the rear shock, EXC logo stamped, a few minutes to fit.
Yozma IN 11 specs
Yozma's published figures: 4800W peak mid-drive motor, 200 Nm of torque, 45 mph top speed, 52V 27Ah battery (1.4 kWh), up to 55 miles of range, six hours to charge on the 52V 5A charger. 14in front and 12in rear wheels, 29.5 in seat height, 43.3 in wheelbase, 200mm ground clearance, 134.5 lb, 220 lb maximum load. High carbon steel frame, chain drive on a 420 chain with 116 links, hydraulic front suspension and a nitrogen rear shock, front and rear hydraulic disc brakes. Eco, Sport, Race and Stunt modes, auto wheelie assist adjustable from 15 to 40 degrees in Stunt mode, one-button reverse, a magnetic emergency cutoff and IPX6 water resistance. Launched October 22, 2026 in black; a white edition pre-sells November 9 to 15.
Yozma IN11 questions
Is there a Yozma IN11 Pro? No. Yozma sells the IN 11 in black and white. The IN10 Pro is a separate bike with larger wheels and its own parts; the IN11 is not a Pro version of anything.
Do Yozma IN10 parts fit the IN11? The bars, pegs, shift lock, grips, plate, light kit and shock cover on this page do. The brake kit does not cross over; the IN11 kit has its own mount.
Does the IN11 brake kit need a new rotor? No. It runs on the factory rotor and does not fit aftermarket rotors.
What size wheels does the IN11 have? 14in front and 12in rear, the same sizes as the IN10.
How does the Baja light kit connect to the IN11? It does not. It runs on its own battery with a switch, with no wiring into the bike.
When do IN11 parts ship? Order before 12pm ET and it ships the same day. After 12pm it goes out the next business day.